valves. The Vee-Ball valve combines globe valve
ruggedness with the efficiency of a rotary valve. The
a contoured segmented V-Notch ball. A shearing
(figure 1) promotes smooth, nonclogging operation.
slurries.
(see Specifications).
metal and soft ball seal materials are available. A
many different applications in the process industries.
Valve End Connection Styles
V150:
Flanged valves that mate with CL150
raised-face flanges and EN 1092-1 Type B raised-face
and Type F Recess
V200:
Flangeless (all sizes) and flanged valves that
mate with CL600 raised-face flanges (NPS 2-8)
V300:
Flanged valves that mate with CL300
raised-face flanges and EN 1092-1 Type B raised-face
and Type F Recess
Maximum Inlet Pressures
(1)
V150 or V300 WCC (or 1.0619 Steel), CF3M (or
1.4409 SST), CG8M, LCC, M35-2, CK3McuN, CD3MN,
and CD3MWCuN Valves:
Consistent with CL150 for
V150 or CL300 for V300 pressure-temperature
ratings per ASME B16.34 or with PN
pressure-temperature ratings shown in table 1.
Note:
CF3M is the standard material offering in Europe and
Asia-Pacific. 1.0619 Steel and 1.4409 SST are also
standard material offerings in Europe.
V200 WCC, CG8M, and LCC Valves:
Consistent with
applicable pressure-temperature ratings in table 1 per
ASME B16.34.
CW2M:
Consistent with applicable
pressure-temperature ratings shown in table 6.
Do not exceed the material temperature capabilities
shown below or the pressure drop limitations.
Maximum Shutoff Pressure/Temperature Ratings
(1)
Composition (Fisher TCM Plus or TCM Ultra), Flat
Metal (NPS 3 through 12 valves only), HD and High
Temperature HD Metal Ball Seals and Flow Ring:
See
table 8.
Shutoff Classification
(1)
Fisher TCM Plus or Ultra Ball Seal (Forward Flow):
Class VI per ANSI/FCI 70-2 and per IEC 60534-4,
Flat Metal Ball Seal for NPS 3 through 12 only
(Forward Flow):
Class IV per ANSI/FCI 70-2 and per IEC
60534-4,
HD (Heavy Duty) Ball Seal (Bidirectional Flow):
0.01%
of valve capacity; Class IV per ANSI/FCI 70-2 and IEC
60534-4; Maximum allowable pressure drop in
reverse flow is 6.9 bar (100 psi);
High Temperature HD (Heavy Duty) Ball Seal
(Bidirectional Flow):
Class III per ANSI/FCI 70-2 and
IEC 60534-4
Flow Ring Construction (Bidirectional Flow):
5% of
valve capacity at full travel
Micro-Notch Ball with HD Seal:
4 SCFH (Leakage rate
equivalent to Class IV for standard ball. This is based
on the capacity of a standard ball.)
Construction Materials
See tables 4 and 5
Temperature Capabilities
(1,2)
Composition Seals
Fisher TCM Plus:
-46 to 232
_
C (-50 to 450
_
F)
Fisher TCM Ultra:
-46 to 260
_
C (-50 to 500
_
F)
HD Metal Seals:
-46 to 288
_
C (-50 to 550
_
F)
High Temperature HD Metal Seal:
288 to 427
_
C (550
to 800
_
F)
.
Contact your Emerson Process
Management sales office
if higher temperatures are
required.
Ceramic Micro-Notch Ball:
-46 to 93
_
C (-50 to
200
_
F)
(4)
Flow Ring or Flat Metal Seal :
-198 to 425
_
C (-325 to
800
_
F)
PEEK/PTFE Bearings:
-198 to 260
_
C (-325 to 500
_
F)
Packing Constructions
PTFE V-ring:
-46 to 232
_
C (-50 to 450
_
F)
Graphite:
-198 to 538
_
C (-325 to 1000
_
F)
ENVIRO-SEAL
t
Single PTFE V-ring:
-46 to 232
_
C (-50
to 450
_
F) (for 100 ppm service requirements)
ENVIRO-SEAL Graphite:
-7 to 316
_
C (20 to 600
_
F) (for
100 ppm service requirements). This packing
arrangement can be used to 371
_
C (700
_
F) for
non-environmental service.
Flow Characteristic
Modified equal percentage
Dimensions
See figures 7, 8, and 10 for dimensions
Optional Face
-
to
-
Face Dimensions
J
ASME B16.10 short face-to-face dimensions are
available as an option for NPS 1 through 12 valves.
Note that ASME B16.10 short dimensions are actually
longer than ISA S75.08.02. See figure 11 for
dimensions